How to deal with the dust at the discharge port of tons of bags, many powder enterprise customers, a lot of materials are tons of bag packaging, such packaging transportation and storage are very convenient, while the cost is low, the cost performance is quite high, but in this way, how to deal with the dust at the discharge port of tons of bags has become a headache for the discharge position of tons of bags.
In the traditional unloading method that we understand, if the material in the ton bag is to be unloaded into the large bin or reactor, the ton bag part of the enterprise is operated like this: lift the ton bag to the large bin or reactor above the manhole, directly from the manhole; Because there is not enough dust removal sealing device, the dust generated in the discharge process is very large, and the material is also possible to leak losses, which brings losses to powder enterprises.
Ton bag unpacking machine is specially used for ton bag unloading equipment, the whole sealed pipeline conveying unloading, greatly reducing the discharge of dust generated by the discharge port in the process of ton bag unloading several times to improve the work of ton bag unloading, the efficiency is several times the traditional manual unloading equipment working principle: The tonnage bag unloader is divided into two layers inside and outside. Lift the tonnage bag to the top of the unloader, pull the tonnage bag opening to the sandwich of the unloader, manually start the cylinder pressing device, and press the tonnage bag opening through the sealing ring.
At this time, manually open the cable for unloading tons of bags and start unloading materials. At the same time, in the process of unloading materials, we use a beating device to prevent the material from forming arch, no dust leakage during the process of unloading tons of bags and bridge, and save a lot of labor costs
CONTACT
