Container inflatable bag: The outer bag is made of PP and PE coated kraft paper, tough and firm, and the bag is based on a 5-layer arch made of PE nylon film. The one-way check valve is quickly inflated or deflated, seals solids, and can withstand pressures of more than 7 tons. Simple and fast to use, can greatly save packaging time, effectively reduce transportation costs, in container transportation; Trailers, trains and other modes of transport can effectively protect goods from being squeezed and collided during transport.
Air compressor needs to have an air gun, lack of any, the following is the use of experience, we hope to be able to help.
First, tools: air compressor, inflation gun, inflation tube one
Container inflatable bag installation method
Two, use container inflatable bags
1. Need to be equipped with an air compressor or pull out the high-pressure gas pipe from the workshop, you can directly assemble a ready-made gas gun.
2. The best operation can pre-charge about 70% of the gas in the filling bag according to the size of the filling gap before the container, which can also greatly improve the loading speed, which is my trick.
3. In addition, please note that in normal use, if the goods are equipped with sharp corners (such as wooden pallets, wooden boxes, etc.), the inflatable bag on both sides of corrugated cardboard or other flat plates can effectively protect the inflatable bag from puncture.
Three things to pay attention to
Note: Do not use inflatable bags between the cargo and the container door to prevent injury when opening the container door. The end of the container can be used to hold other products - polyester extruded composite fiber tape and strap buckle, container inflatable bag mounting method.
CONTACT
