FIBC is a kind of transport packaging container, so its quality is very important, so there are strict standards for its quality on the market. In the standard of judging the quality of FIBC, its slings and slings cannot be ignored; then today we will use these two points as a benchmark to talk about how to measure the quality of these two parts.
The first is sampling; intercept the sling samples of appropriate length at the slings of the FIBC. At least two sling samples are required.
The second is the tensile strength test; the sample is mounted on the jig of a tensile testing machine with a jig spacing of 220 mm, and stretched at a speed of about 100 mm/ min to measure the tensile strength at break.
Finally, the elongation test; the sample is installed on the tensile testing machine, after applying a 196n tension load, a 200mm spacing mark is drawn, and the speed is stretched at 100mm/ min, when the load reaches 30% of the tensile strength f, The distance between the marking lines is measured.
The above three points are the methods to check the quality of the two parts of the container bag sling and sling, and I hope to bring you some help.
CONTACT
