High temperature resistant ton bag round loom is indispensable equipment for our ton bag manufacturers. The high temperature resistant ton bag round loom weaves the warp and weft wire pulled out of the wire drawing machine into a base cloth. It is precisely because the weaving speed of the equipment is fast, our worker master can not make mistakes in operation, otherwise the loss is very large.
High temperature resistant ton bag
Press the power switch, make it run intermittently at low speed, and observe if there is no fault. Stop the wire wound tube is guided from the lowest row to the guide plate at the head of the frame, the inner and outer gauge rings are introduced, and the middle position is pulled up and knotted. Install shuttle to separate warp wires between gauge ring and bracket.
Adjust the gauge ring to achieve the required width. Press the linkage switch to make the loom and winder start running at the same time and enter the normal weaving and winding. The high temperature tonnage bag weft wire is shuttled, separated through the left end hole of the wire tube, inserted into the seat, and then the compression spring is installed on the right end. The high temperature resistant ton bag leads the weft wire through the porcelain bottle into the roller, and pulls the wire end in the groove. The gold diamond woven bag points the button to turn the shuttle 90 degrees and insert the weft wire into the loom.
CONTACT
