Anti-static Tension Ton Bag

TYPE-B anti-static container bag

In accordance with the International Electrotechnical Commission IEC 61340-4-4 standard

TYPE-B Anti-static bag/Low breakdown voltage to prevent static electricity

Product Introduction:

Size: 105X105X120cm (can be customized according to requirements)

The height of inlet and outlet and ring can be customized according to customer equipment

Applicable products:

Used to transport dry, flammable powder containers without flammable solvents or gases around them.

Do not use:

Do not use this product when flammable solvents or gases are present around the container.

TYPE-B container fabric in the weaving and coating process to add a proportion of antistatic master material, this special process makes TYPE-B container fabric has a low breakdown voltage, can prevent the generation of high strength of dangerous static electricity, to ensure the safety of the loading and unloading process.
* The surface resistance of both sides of the fabric should be less than 6KV.

Product features:

The design of this product takes into account that the ultra-fine powder will be sprayed out of the pinhole, so the anti-leakage sliver and non-woven anti-leakage are added. Besides, considering that the length and width of the product are too large to be transported on the truck side by side, the tension rib is added to solve the expansion problem. Considering the poor fluidity of the customer's loading materials, we suggest using the mesh tension sheet as the tension rib. All the above problems have been solved to avoid the difficulty of material entering the inside of the Angle bar. Allow customers to install, use worry-free.