Safety factor index of FIBC

FIBC is a necessity for large-scale lifting operations, and its quality is directly related to the safety of life and property. Therefore, each country has its own strict standards for the products produced by FIBC manufacturers to ensure safe operation in the future.

According to the analysis of industry professionals, the focus of standards varies from country to country. For example, Japan pays more attention to details, Australia pays more attention to form, and the European Community standard pays more attention to the performance and technical indicators of FIBC products, and strictly controls product quality from inspection data. , Especially in terms of anti-ultraviolet and anti-aging, etc., have their strict industry regulations. The quality of FIBC can be reflected by the safety factor. In layman's terms, the "safety factor" is the ratio between the maximum bearing capacity of the product and the rated design load. The most direct detection method is to load a certain quality item, repeatedly lift and drop it, and then check whether the item and the bag body are abnormal, and whether the connection is damaged.

In the industry standard, the safety factor of FIBC is generally required to be 5-6 times, this product can be used safely for a longer time. If we add anti-ultraviolet additives in the production process, their application range will be more extensive and more popular with consumers. In addition, when the sling of the container bag is connected to the bag body, there are various forms such as top hanging, bottom hanging, side hanging, etc., and are connected by sutures, so the quality of the sutures and process requirements can not be sloppy. As we all know, FIBC is mainly used to hold bulk, granular or powder items, and their physical density and looseness also have a significantly different effect on the overall results. Therefore, when testing the performance of the FIBC, we should try to use the products that are close to the customer's load as much as possible. Such a test result is easier to be closer to the actual needs of the customer.