Tons of bags produced by manufacturers are used in large-scale industrial production and transportation process, tons of bags can transfer a variety of different substances, but the load belongs to some food, then in the design process is different from industrial tons of bags, the matters required attention are also different, then food grade tons of bags should be how to design?
Ton bag manufacturer.
When the ton bag to be designed belongs to the food grade, then it is necessary to clearly know how much weight is transferred, according to the specific volume of the material to determine the specific volume of the food ton bag, but also to see whether the loaded goods have hard or block items, if there is, it is necessary to design some base cloth with thickness as the main material of the ton bag.
2 When designing the structure of the food bag, according to the strength of the standard waist band strength of the ton bag to reach more than twice the toughness of the substrate, but the actual effect of this design is not very good, because the toughness of the substrate and the waist band strength is not the same, then it will lead to the first crack of the substrate, for this reason, at the time of design, whether the waist band strength is appropriate, the substrate should use the same hardness.
(3) The selection of sling is also very important, according to the standard is a safety index of 1 to 6, but in the design of food grade such tons of bags to consider the strength of the production of the sling consumption, as well as the need to lift the form, such as 500 kg of food tons of bags, then generally can use 50 to 60 per meter of sling, tension is 1500N/M.
4 ton bag manufacturers in the production of food bags will add some auxiliary agents, so as to extend the life of the ton bag, and even improve the anti-aging ability of the ton bag in the sun.
The real second-hand ribbon is also very well understood by us, that is, the ton bag used for the second time. As we generally install some flour, feed and other materials using tons of bags is actually not a problem, this use of tons of bags are relatively high in gram weight, quality and density advantages are shown. In fact, there are some unused items in it, and the things left behind can also have the phenomenon of damage, compared with the new ton bag, in fact, the quality and appearance of the second-hand is still better, the weight is relatively low, in the processing of customization is generally relatively neat and clean, good quality without damage is also the reason for its use.
Let's first talk about the weight of the ton bag itself, and now the ton bag is very important for its own load in production, of course, it is also an indispensable part, and it is also a point valued by many businesses. Its own importance is to directly affect the load-bearing capacity of our ton bag, and then we as consumers can also measure the ton bag weight by means of two ways, the first is a single gram weight analysis, the second is the square gram weight. But in fact, its results are similar, different tons of bag weight measurement is not the same, if a ton of bag weight difference of one gram, so for his cost and use will be greatly discounted, which is of course many businesses value the quality of tons of bags affected.
The gloss of the ton bag is what we need to pay attention to when we are producing on the side. If there are problems, we need to make timely adjustments. We should be particularly careful when choosing materials, so that we can achieve the ideal effect we hope. If there is really a problem, we can change the gloss of the appearance of the ton bag when changing to achieve the lightening effect, if we feel that it is beyond the normal value, we do not have to worry about it, and there is a way to timely reduce the gloss of the appearance of the ton bag.
Since the use of tons of bags when aging, there is a problem, then you can improve through the technical aspects, but also the user's demand for tons of bags, in the production of tons of bags can be understood the user's conditions of use, for the required users can add UV additives, according to the actual needs of customers to design and production of tons of bags. For the tons that have been used in the factory, the aging of the molecular chain is the phenomenon of fission, and its mechanical properties are also greatly reduced.
In general, such a situation is that the ton bag has been aging, its service life is constantly decreasing, and the raw materials should be selected as new when making, if the aging problem is to be solved, anti-aging can be added, but the process of adding should be added in more proportion, if the dispersion of the UV agent is not easy to clean up, then it will be difficult to form in processing. Then the anti-aging agent can solve such a problem, and the anti-aging agent has different colors, and the user can choose different colors according to their needs.
The main material for the aging treatment of ton bag manufacturers is anti-aging masterbatch, but the anti-aging masterbatch has strict requirements in the use process, and the quality of the product must be ensured in the process of use. A good ton bag, whether it is base cloth or sling and material mouth cloth, has serious requirements for its anti-aging. If one of the pieces is aging, it can not ensure the safety of the product use process.
CONTACT
