The woven bag manufacturer must master the four-step difference in color printing when choosing color printing: ratio of height to width, identification of materials, identification of raw materials, and identification of well-known brands. Let's discuss the actual process below.
One step: the difference in the main parameters of the packaging line specifications
The packaging lines made by small manufacturers with low professional capacity woven bags completely do not comply with the regulations. Due to the lack of technical and professional equipment testing, errors such as packaging shake and size are often produced. At a glance, it is understood that they are not technical professional woven bag manufacturers. Packing bags produced.
Step 2: Look at the material difference of woven bags
Some woven bags are produced by manufacturers, so as to annex large-scale shopping malls at a low price, and are willing to refill them. The total width of the package is less than one-sixth of the standard. There are also tapes for maintaining agricultural mulch, which are also narrow for the bottom mold. The actual effect of the composition is to lose the viscosity and form the packaging bag partition.
Three steps: Differences in raw materials of plastic woven bags
The inferior raw materials are unsatisfactory and the bottom mold can not be maintained. The color printing factory with strong overall strength will set up an adhesive tape production line to professionally produce adhesive tape for color printing. Instead of just looking for a production.
Four steps: the difference between well-known brands
Fake color printing is very simple to reduce the cost of packaging, and it is also very simple to cause a lot of damage to the die cutting machine. If the manufacturer of the woven bag chooses this kind of inferior color printing woven bag, there will be some hazards of bad luck in the middle and late stages. However, this woven bag has low precision, large specification errors, and no guarantee of packaging quality. Instead, it simply constitutes a reduction in output power.
CONTACT
